icecube.gcdserver package

Submodules

• icecube.gcdserver.BaselineImport module
  • doInsert()
  • importFile()
• icecube.gcdserver.BlobDB module
  • BlobDB
    • BlobDB.calibrationDocuments()
    • BlobDB.deployedDevices()
    • BlobDB.deployedNameMap()
    • BlobDB.geometryDocuments()
    • BlobDB.getDeploymentTuple()
    • BlobDB.mbidMap()
    • BlobDB.omKeyMap()
    • BlobDB.statusDocuments()
    • BlobDB.tankMap()
• icecube.gcdserver.Calibration module
  • ATWDCalibration
    • ATWDCalibration.getSlope()
    • ATWDCalibration.setSlope()
  • ATWDConstants
    • ATWDConstants.N_ATWDS
    • ATWDConstants.N_BINS
    • ATWDConstants.N_CHANNELS
    • ATWDConstants.atwdKey()
    • ATWDConstants.channelKey()
    • ATWDConstants.checkValid()
  • ATWDDeltaTCal
    • ATWDDeltaTCal.getDeltaT()
    • ATWDDeltaTCal.setDeltaT()
  • ATWDFrequencyCal
    • ATWDFrequencyCal.C0
    • ATWDFrequencyCal.C1
    • ATWDFrequencyCal.C2
    • ATWDFrequencyCal.COEFF
    • ATWDFrequencyCal.dataNameString
    • ATWDFrequencyCal.getFit()
    • ATWDFrequencyCal.getFitRegressionCoeff()
    • ATWDFrequencyCal.setFit()
  • AmplifierCal
    • AmplifierCal.getGain()
    • AmplifierCal.setGain()
  • BeaconBaseline
    • BeaconBaseline.getATWDBaseline()
    • BeaconBaseline.setATWDBaseline()
  • CalibrationData
  • Keys
    • Keys.ATWD_SIGMA
    • Keys.CHI_2
    • Keys.CORR_FACTOR
    • Keys.DATE
    • Keys.DELTA_T
    • Keys.END_RUN
    • Keys.ERROR
    • Keys.EXP2_NORM
    • Keys.EXP2_SCALE
    • Keys.EXP_NORM
    • Keys.EXP_SCALE
    • Keys.FADC_BASELINE
    • Keys.FADC_SIGMA
    • Keys.FE_IMPEDANCE
    • Keys.GAIN
    • Keys.GAUSS_MEAN
    • Keys.GAUSS_NORM
    • Keys.GAUSS_STDDEV
    • Keys.HG_LG_CROSSOVER
    • Keys.INTERCEPT
    • Keys.MUON_PEAK_WIDTH
    • Keys.NDF
    • Keys.NOISE_RATE
    • Keys.N_ENTRIES
    • Keys.PE_PER_VEM
    • Keys.REG_COEFF
    • Keys.SLC_GAUSS_MEAN
    • Keys.SLC_INTERCEPT_C0A0
    • Keys.SLC_INTERCEPT_C0A1
    • Keys.SLC_INTERCEPT_C0A2
    • Keys.SLC_INTERCEPT_C1A0
    • Keys.SLC_INTERCEPT_C1A1
    • Keys.SLC_INTERCEPT_C1A2
    • Keys.SLC_INTERCEPT_CunkA0
    • Keys.SLC_INTERCEPT_CunkA1
    • Keys.SLC_INTERCEPT_CunkA2
    • Keys.SLC_SLOPE_C0A0
    • Keys.SLC_SLOPE_C0A1
    • Keys.SLC_SLOPE_C0A2
    • Keys.SLC_SLOPE_C1A0
    • Keys.SLC_SLOPE_C1A1
    • Keys.SLC_SLOPE_C1A2
    • Keys.SLC_SLOPE_CunkA0
    • Keys.SLC_SLOPE_CunkA1
    • Keys.SLC_SLOPE_CunkA2
    • Keys.SLOPE
    • Keys.SNOW_HEIGHT
    • Keys.SPE_COMP_FACTOR
    • Keys.START_RUN
    • Keys.TAU0
    • Keys.TAU1
    • Keys.TAU2
    • Keys.TAU3
    • Keys.TAU4
    • Keys.TAU5
    • Keys.TAU_FRACTION
    • Keys.TEMPERATURE
    • Keys.VALID
    • Keys.VERSION
    • Keys.X_MAX_F
  • ObjectType
    • ObjectType.AMP_CAL
    • ObjectType.ATWD_CAL
    • ObjectType.ATWD_DELTA_T_CAL
    • ObjectType.ATWD_FREQ_CAL
    • ObjectType.ATWD_SPE_CORR
    • ObjectType.BEACON_BASELINES
    • ObjectType.FADC_BASELINE
    • ObjectType.FADC_DELTA_T_CAL
    • ObjectType.FADC_GAIN_CAL
    • ObjectType.FADC_SPE_CORR
    • ObjectType.FRONT_END_IMPEDANCE
    • ObjectType.GAIN_CAL
    • ObjectType.JOINT_SPE_CORR
    • ObjectType.MPE_DISC_CAL
    • ObjectType.NOISE_RATE
    • ObjectType.PMT_DISC_CAL
    • ObjectType.PMT_TRANSIT_TIME_CAL
    • ObjectType.SLC_CALIBRATION
    • ObjectType.SNOW_HEIGHT
    • ObjectType.SPE_DISC_CAL
    • ObjectType.TOROID_DROOP
    • ObjectType.VEMCAL
• icecube.gcdserver.CalibrationDefaults module
• icecube.gcdserver.ConfigImport module
  • doInsert()
  • importActiveTriggers()
  • importConfig()
  • importDOMConfigList()
• icecube.gcdserver.DOMCalImport module
  • DOMCalImporter
    • DOMCalImporter.importFile()
  • LinearFit
    • LinearFit.fromElement()
  • doInsert()
• icecube.gcdserver.DOMTiltImport module
  • doInsert()
  • importFile()
• icecube.gcdserver.DetectorStatus module
  • DOMConfigList
    • DOMConfigList.DOM_CONFIG_LIST_KEY
    • DOMConfigList.addDOMConfig()
    • DOMConfigList.getDOMConfigs()
  • ObjectType
    • ObjectType.DOM_CONFIG_LIST
    • ObjectType.RUN_CONFIG
    • ObjectType.TRIGGER_CONFIG_LIST
  • RunConfig
    • RunConfig.DOM_CONFIG_LIST_NAMES_KEY
    • RunConfig.TRIGGER_CONFIG_LIST_NAME
    • RunConfig.addDOMConfigListName()
    • RunConfig.getDOMConfigListNames()
    • RunConfig.getTriggerConfigListName()
    • RunConfig.setTriggerConfigListName()
  • TriggerConfigList
    • TriggerConfigList.TRIGGER_CONFIG_LIST_KEY
    • TriggerConfigList.addTriggerConfig()
    • TriggerConfigList.getTriggerConfigs()
• icecube.gcdserver.Email module
  • EmailException
  • sendMessage()
  • smtp_context()
• icecube.gcdserver.GCDGeneratorModule module
  • GCDGenerator
    • GCDGenerator.Configure()
    • GCDGenerator.Process()
• icecube.gcdserver.Geometry module
  • DataObject
    • DataObject.OBJECT_DATA_KEY
    • DataObject.OBJECT_NAME_KEY
    • DataObject.OBJECT_TYPE_KEY
    • DataObject.data
    • DataObject.name
    • DataObject.type
  • DictionaryBacked
    • DictionaryBacked.getdict()
    • DictionaryBacked.wrapdict()
  • GeometryObject
  • Keys
    • Keys.DEPLOYMENT_COMMENT
    • Keys.DEPLOYMENT_DATE
    • Keys.GEOMETRY_X
    • Keys.GEOMETRY_Y
    • Keys.GEOMETRY_Z
    • Keys.MBID
    • Keys.NICKNAME
    • Keys.ORIENTATION
    • Keys.ORIENTATION_AZIMUTH
    • Keys.ORIENTATION_NX
    • Keys.ORIENTATION_NY
    • Keys.ORIENTATION_NZ
    • Keys.PMT_ID
    • Keys.PMT_TYPE
    • Keys.POSITION_ID
    • Keys.SENSOR_AREA
    • Keys.STRING_ID
    • Keys.TANK_HEIGHT
    • Keys.TANK_LABEL
    • Keys.TANK_LINER
    • Keys.TANK_RADIUS
    • Keys.TANK_WATER_HEIGHT
    • Keys.TOROID_TYPE
  • ObjectType
    • ObjectType.AMANDA_SYNC
    • ObjectType.AMANDA_TRIG
    • ObjectType.DMICE
    • ObjectType.ICEACT
    • ObjectType.ICECUBE_DOM
    • ObjectType.ICETOP_DOM
    • ObjectType.ICE_TOP_STATION
    • ObjectType.ICE_TOP_TANK
    • ObjectType.IN_ICE_STRING
    • ObjectType.POINT
    • ObjectType.SCINTILLATOR
  • Orientation
    • Orientation.DOWN
    • Orientation.UP
  • PMTType
    • PMTType.R7081
    • PMTType.R7081_100
  • TankLiner
    • TankLiner.TYVEK
    • TankLiner.ZIRCONIUM
  • ToroidType
    • ToroidType.NEW
    • ToroidType.OLD
  • getTankName()
• icecube.gcdserver.GeometryDefaults module
• icecube.gcdserver.I3CalibrationBuilder module
  • DuplicateDataError
  • InsufficientDataError
  • buildI3Calibration()
  • buildI3IceTopSLCCalibrationCollection()
  • getDOMCalibration()
  • loadRecord()
• icecube.gcdserver.I3DetectorStatusBuilder module
  • buildDOMStatus()
  • buildI3DetectorStatus()
  • buildTriggerStatus()
  • getEngineering()
  • getGainType()
  • getLCMode()
  • getLCTXMode()
  • getLCType()
  • getLCValue()
  • getSubdetector()
  • getSubvalue()
  • getTrigMode()
• icecube.gcdserver.I3FlasherSubrunMapBuilder module
  • buildI3FlasherSubrunMap()
• icecube.gcdserver.I3GeometryBuilder module
  • TankData
  • buildI3Geometry()
  • buildTankGeo()
  • getOMGeo()
  • getOMType()
  • getTankType()
• icecube.gcdserver.I3Live module
  • I3LiveException
  • doGetLiveRunData()
  • getLiveData()
  • getLiveFlasherData()
  • getLiveRunData()
• icecube.gcdserver.I3MS module
  • DBInsertHandler
    • DBInsertHandler.close()
    • DBInsertHandler.commit()
    • DBInsertHandler.insert()
  • DBReceiver
    • DBReceiver.close()
  • I3MSBase
    • I3MSBase.close()
  • I3MSSender
    • I3MSSender.send()
  • I3MSSubscriber
    • I3MSSubscriber.close()
  • I3MSTransactionSender
    • I3MSTransactionSender.close()
    • I3MSTransactionSender.send()
  • I3MSWrap()
  • NullSender
    • NullSender.close()
    • NullSender.send()
  • calDBInserter()
  • db_receiver_context()
  • geoDBInserter()
  • getSender()
  • i3ms_sender_context()
  • statusDBInserter()
• icecube.gcdserver.I3OmDb module
• icecube.gcdserver.I3OmDbFlasherSubrunBuilder module
• icecube.gcdserver.MongoDB module
  • CalDBInserter
    • CalDBInserter.doCommit()
    • CalDBInserter.insert()
  • DBInsertError
  • DBInserter
    • DBInserter.collectionName()
    • DBInserter.commit()
    • DBInserter.doCommit()
    • DBInserter.docCount()
    • DBInserter.getDocumentCount()
    • DBInserter.getTransactionData()
    • DBInserter.hasTransaction()
    • DBInserter.insert()
    • DBInserter.rollback()
  • DBMissingConfiguration
  • DBTransaction
    • DBTransaction.getState()
    • DBTransaction.getTransactionDocument()
    • DBTransaction.getTransactionNumber()
    • DBTransaction.setCommitted()
    • DBTransaction.setError()
    • DBTransaction.setRollback()
  • DBTransactionError
  • EmptyTransaction
  • GeoDBInserter
    • GeoDBInserter.doCommit()
    • GeoDBInserter.insert()
  • QuickInserter
    • QuickInserter.insert()
  • StatusDBInserter
    • StatusDBInserter.doCommit()
    • StatusDBInserter.insert()
  • countObj()
  • destroyDB()
  • fillBlobDB()
  • getAggregationResult()
  • getAllCalObjectsByType()
  • getCalPipeline()
  • getDB()
  • getDB_pymongo3()
  • getDB_pymongo4()
  • getDocumentCounts()
  • getGeoPipeline()
  • getName()
  • getNameType()
  • getTestDB()
  • getUniqueDocumentMap()
  • initCalDB()
  • initDB()
  • initGeoDB()
  • initStatusDB()
  • initTransactionDB()
• icecube.gcdserver.NoiseRateImport module
  • doInsert()
  • importFile()
• icecube.gcdserver.OptionParser module
  • GCDOptionParser()
  • getConfigOption()
• icecube.gcdserver.RunData module
  • RunData
• icecube.gcdserver.SLCCalImport module
  • doInsert()
  • importFile()
• icecube.gcdserver.SPEFitImport module
  • doInsert()
  • getFitType()
  • importFile()
  • parseMeanSPEFit()
  • parseMeanSPEFitV2()
• icecube.gcdserver.SnowDepthImport module
  • doInsert()
  • importFile()
• icecube.gcdserver.VEMCalImport module
  • doInsert()
  • importFile()
• icecube.gcdserver.XMLDict module
  • XMLDict()
• icecube.gcdserver.util module
  • getDOMCalFit()
  • getOMKey()
  • getOrientation()
  • getOrientationDirection()
  • getPosition()
  • get_value()
  • setI3Time()
  • setStartStopTime()